CX-AF1062 Audio Interface

The CX-AF1062 is an Audio interface designed for the CX-1000 series IP communication system that features decentralized distribution configuration. By simply connecting to a network (LAN or WAN), it is possible to make audio announcements from the microphone or audio source devices connected to this unit to the intercom stations or amplifier units. By registering audio files in the unit's built-in memory, Chime broadcast and EV broadcast can be performed. It is equipped with 6 analog audio inputs and 2 analog audio outputs. You can adjust the volume for each audio input/output channel using the front panel-mounted volume knob or by software. In addition, the sound quality for each audio input/output channel can also be ad justed by software. Announcements and various functions can be started or stopped using the front panelmounted direct keys.

(*1) 0 dB = 1V

Power Source	24 V DC (operating range: 21.6 - 26.4 V DC) Removable terminal block ( 2 pins) or use of the optional AC adapter
Current Consumption	340mA
Power Consumption	8 W
Audio Input	3 channels, -60 dB (1)/0 dB (1) selectable, 600 Ω, transformer-balanced 3 channels, 0 dB (*1), 10 kΩ, electronically balanced Removable terminal block (9 pins x 2) Only Input 1 is used in common with the front-mounted 9l6.3 mm phone jack.
Speech Method	2 channels, 0 dB (*1 ), 10 kΩ, electronically-balanced, removable terminal block (3 pins X 2)
Audio output	200 Hz - 16 kHz
Signal to Noise Ratio	60 dB or more
Distortion	1 % or less
Volume Control	Audio input volume control x 6, Audio output volume control x 2
Signal Processing	Input channel: Gain, EQ x 2, Comp, AGC, Trim, Gate ( for VOX function) Output channel: Gain, EQ x 7
Network	Network I /F: 100BASE-TX Network protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, RTSP, IGMP, NTP, FTP, RSTP Audio packet transmission system: Unicast, Multicast Number of paging destinations: Unicast (max. 16), Multicast ( \max. 2999) Connector: RJ45 connector x 2 Network cable: UTP (Cat5 or greater)
Audio Transmission	Sampling frequency: 48 kHz, 16 kHz (controllable on the software) Audio codec: PCM, G. 722 Quantization bit depth: 16-bit Voice packet loss recovery: Silence insertion
Operation	Direct key x 10, Reset key x 1, Setting switch (input level setting (MIC/LI NE selectable)) x 1
Indicators	LED indicators: LAN (green) x 2, POWER (green) x 1, RUN (green) x 1, STATUS (yellow, red, green) x 1, INPUT (red, green) x 6, OUTPUT (red, green) X 2 Direct keys: SELECT ( green) x 10, STATUS ( yellow, red, green) x 10 Direct keys: SELECT ( green) x 10, STATUS ( yellow, red, green) x 10
Control Input	10 channels, no-voltage make contact input, open voltage: 24 V DC, short-circuit current: 5 mA or less, removable terminal block (12 pins X 2)
Control Output	4 channels, relay output, maximum contact capacity: 30 V DC/1.0 A, removable terminal block (6 pins x 2) 6 channels, open collector output, maximum contact capacity: 30 V DC/100 mA, removable terminal block (6 pins x 2)
Installation Method	Desktop, rack, or wall mounting ( Rack or wall mounting needs optional brackets.)
Operating Temperature	0°c to +40 °c
Operating Humidity	90 %RH (no condensation)
Finish	Panel, Case: Pre-coated steel plate, black, 30 % gloss Front cover: ABS resin, gray smoke
Dimensions	420 (W) X 44.3 (H) X 284.5 (D) mm
Weight	3.1 kg
Accessory	Removable terminal plug 2 pins) ... 1, Removable terminal plug ( 3 pins) ...2, Removable terminal plug (6 pins) ···4, Removable terminal plug (9 pins) ...2, Removable terminal plug (12 pins) ...2, Plastic foot ···4, Screw for fitting plastic foot ···4 Removable terminal plug 2 pins) ...1
Option	AC adaptor: AD-246 Wall mounting bracket: YC-850 Rack mounting bracket: MB-15B